|
|
Build Your Online Product Catalogs?
| Product Name: |
Mould making silicone rubber
|
| Supply Ability: |
MOQ : 200kg |
| Related proudcts |
silicone rubber, mould making, mould making silicon, |
| Specifications |
Moulding silicon rubber is a kind of flowing liquid |
| Price Term: |
FOB,CFR,CIF, |
| Port of loading: |
shenzhen |
| Minimum Order |
200KG |
| Unit Price: |
USD 6.5-8.9 |
|
Mould making silicon rubber is suitable for industries such as toys, gifts, decoration, plate engrave, human replica, art crafts, resin crafts, poly resin crafts, unsaturated resin crafts, candle crafts, plastic crafts, stationeries, plaster crafts and Buddhist statue crafts.
Features of mould making silicone rubber
1. Good characteristics of easy-operation
2. Light viscosity and good flowability
3. Low shrinkage
4. Favorable tension
5. No deformation
6. Favorable hardness
7. High temperature resistance, acid and alkali-resistance and ageing resistance
FAQ of moulding silicone rubber
1. Why could the silicone mold be reused only for a few times?
It can be due to the following reasons:
a. Adding too much silicone oil in to silicon rubber. Silicon oil is an additive which destroies the molecular weight of silicone rubber and reduce the tension and tear strength.
b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs and the silicon rubber with a low hardness to makes molds for large sized products with simple designs.
(Notes: we should choose the silicon rubber specifically according to the requirements of our products to avoid this problem.)
2. Why does the silicone mold get burnt out?
This consequence happens only because you have left out the important notes when using unsaturated resin materials to produce your products. The unsaturated resin produces great heat when added the curing agent. So you must demould the product within 3 minutes to avoid this problem.
3. Why does the silicone mould appear to be dry outside but wet inside?
Because molding silicone rubber is a kind of condensation silicone rubber, which get solidified after absorbing moisture from the air. In order to provide a significant shelf-life for the silicon rubber, we will dry out the water in the silicon rubber.
Solution: Add 0.05% water into the silicon rubber and Stir over a low speed briefly when you use it.
4. Why is the silicon mold |
| Company: |
Shenzhen Hong Ye Jie Technology Co., Ltd.
|
| Contact: |
Ms. Christy xu |
| Address: |
Building A, No. 3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District, Shenzhen, Guangdong, China (Mainland) |
| Postcode: |
518117 |
| Tel: |
086-755-89948006 |
| Fax: |
086-755-89948030 |
| E-mail: |
|
|
|
|
Home
